- Research article
- Open Access
Accuracy of genome-wide imputation in Braford and Hereford beef cattle
BMC Genetics volume 15, Article number: 157 (2014)
Strategies for imputing genotypes from the Illumina-Bovine3K, Illumina-BovineLD (6K), BeefLD-GGP (8K), a non-commercial-15K and IndicusLD-GGP (20K) to either Illumina-BovineSNP50 (50K) or to Illumina-BovineHD (777K) SNP panel, as well as for imputing from 50K, GGP-IndicusHD (90iK) and GGP-BeefHD (90tK) to 777K were investigated. Imputation of low density (<50K) genotypes to 777K was carried out in either one or two steps. Imputation of ungenotyped parents (n = 37 sires) with four or more offspring to the 50K panel was also assessed. There were 2,946 Braford, 664 Hereford and 88 Nellore animals, from which 71, 59 and 88 were genotyped with the 777K panel, while all others had 50K genotypes. The reference population was comprised of 2,735 animals and 175 bulls for 50K and 777K, respectively. The low density panels were simulated by masking genotypes in the 50K or 777K panel for animals born in 2011. Analyses were performed using both Beagle and FImpute software. Genotype imputation accuracy was measured by concordance rate and allelic R2 between true and imputed genotypes.
The average concordance rate using FImpute was 0.943 and 0.921 averaged across all simulated low density panels to 50K or to 777K, respectively, in comparison with 0.927 and 0.895 using Beagle. The allelic R2 was 0.912 and 0.866 for imputation to 50K or to 777K using FImpute, respectively, and 0.890 and 0.826 using Beagle. One and two steps imputation to 777K produced averaged concordance rates of 0.806 and 0.892 and allelic R2 of 0.674 and 0.819, respectively. Imputation of low density panels to 50K, with the exception of 3K, had overall concordance rates greater than 0.940 and allelic R2 greater than 0.919. Ungenotyped animals were imputed to 50K panel with an average concordance rate of 0.950 by FImpute.
FImpute accuracy outperformed Beagle on both imputation to 50K and to 777K. Two-step outperformed one-step imputation for imputing to 777K. Ungenotyped animals that have four or more offspring can have their 50K genotypes accurately inferred using FImpute. All low density panels, except the 3K, can be used to impute to the 50K using FImpute or Beagle with high concordance rate and allelic R2.
Traditional animal breeding methods utilized phenotypic data and relationships among individuals to make informed mating decision to improve traits of economic significance. Recent advances in DNA technology, led to the full sequencing of several species, including cattle  and to the development of new genomic technologies. SNP genotyping is now possible at a cost reasonable for producers. This includes the Illumina BovineHD (Illumina Inc., San Diego, USA), that makes it possible to genotype 777,962 SNPs in a single chip. The first panel of medium density for bovine was the Parallel 10K SNP released in 2006 by the Parallel Company. In 2007, the Illumina Inc., San Diego, USA developed the Illumina BovineSNP50 panel with 54,609 SNPs and in 2011 it released the Illumina BovineHD panel with 777,962 SNPs. These new genotyping technologies have stimulated the development of new research areas, including techniques to infer SNPs on high density genotype panels for animals that have been genotyped at a lower density.
Procedures for imputation of genotypes, a technique that refers to prediction of ungenotyped SNP genotypes, have been the subject of recent studies in some species, such as, dairy cattle ,, beef cattle ,, horse  and pig . Software programs have been developed to more efficiently and accurately impute high density genotypes -. Density of markers genotyped affects genomic selection accuracy -, and to reduce the cost of genotyping large populations, less dense, less expensive panels can be used and imputation can infer a more dense genotype, enabling broader uptake of genotyping technology by cattle producers ,. The evolution of genotyping technology has resulted in many animals of different breeds being genotyped with a variety of SNP panels. For effective genomic selection, all animals should have genotypes of equivalent density. It has been shown that there is a need to evaluate different panels for imputation to higher density panels. Imputation also eliminates the need for re-genotyping of key animals, reducing costs of genomic selection and association analysis.
The Brazilian cattle industry plays a significant role in the national economy. Brazil has a herd of more than 211 million cattle of which 80% is zebu cattle . Hereford and Braford breeds, together with Angus and Brangus account for 50% of the approximate 8 million doses of beef cattle semen commercialized in Brazil in 2013 . Much of this semen, as well as most live bulls sold are mated to Zebu females with the primary objective of improving carcass quality .
The main objective of this research was to assess accuracy of imputation from lower density SNP panels to genotypes from the Illumina BovineSNP50 and the Illumina BovineHD panels (Illumina Inc., San Diego, USA) in Brazilian Braford and Hereford cattle.
Animal welfare and use committee approval was not necessary for this study because data were obtained from existing databases.
Data was from the Conexão Delta G’s genetic improvement program - Hereford and Braford (Zebu x Hereford) cattle (Conexão Delta G, Dom Pedrito/RS, Brazil), containing approximately 520,000 animals from 97 farms located in the South, Southeast, Midwest and Northeast regions of Brazil. A total of 683 Hereford and 2,997 Braford animals from these farms were genotyped. Of the genotyped animals, there were 624 Hereford and 2,926 Braford animals genotyped with the Illumina BovineSNP50 panel, and 59 Hereford and 71 Braford animals genotyped with the Illumina BovineHD panel from 17 farms located in the South of Brazil. Data also included 88 Nellore bulls from the Paint Program (Lagoa da Serra, Sertãozinho/SP, Brazil) genotyped with the Illumina BovineHD panel.
For imputation to the 50K SNP panel, animals genotyped with 777K SNP genotypes had SNPs not contained on the 50K SNP panel removed. This resulted in a population of 3,768 animals genotyped for 49,345 SNPs. Sites were filtered for GenCall score (> = 0.15) ,, Call Rate (> = 0.90) , and Hardy-Weinberg Equilibrium (P > =10−6) ,. Only autosomes were considered ,. The individual sample quality control considered GenCall Score (> = 0.15) ,, Call Rate (> = 0.90) ,, heterozygosity deviation  (limit of ± 3 SD), repeated sampling and paternity errors . After quality control, 3,698 animals and 43,248 SNP were used for further analysis.
For imputation to the 777K SNP panel, only the animals genotyped with the 777K SNP panel could be used as reference. The SNP quality control was the same as for the imputation to the 50K SNP panel (SNP in the 50K panel that were not in common with the 777K were also removed from 50K). After the quality control, 218 bulls (Hereford = 59, Braford = 71, Nellore = 88) and 587,620 SNPs remained.
Table 1 shows the numbers of genotyped animals after data editing as well as the pedigree structure of the genotyped animals.
Reference and imputation populations
For imputation to the 50K SNP panel, the dataset was split into two populations. The imputation population was comprised of all animals born in 2011. The remainder of the population was assigned to the reference population for imputation. This division resulted in 2,735 animals in the reference population when Nellore animals were included and 2,647 when Nellore animals were not included. A total of 963 animals were sorted into the imputation population.
Hereford and Braford animals in the reference population included 129 sires born before 2008 and 2,518 animals born between 2008 and 2010. From these 2,518 animals, 3.8% had at least one genotyped offspring.
For animals in the imputation population, the 3K, 6K, 8K, 15K and 20K low density SNP panels were created by masking the non-overlapping SNP between the 50K SNP panel and each of these SNP panels. The imputation population included 33 animals with two parents genotyped and 308 animals with one parent genotyped. Moreover, 52% of the imputation animals were offspring of multiple sire matings.
The data set for imputation to the 777K SNP panel contained 71, 59 and 88 Braford, Hereford and Nellore animals, respectively. The strategy used to test the imputation was to create three different data sets randomly alternating animals in the reference population and in the imputation population, always keeping the Nellore animals in reference population as the objective was to test the imputation accuracy of Braford and Hereford cattle. Each reference population was composed by 175 animals (88 Nellore plus 87 Hereford and Braford animals) and each imputation population had 43 Hereford and Braford animals. For animals in the imputation population the 3K, 6K, 8K, 15K, 20K, 50K, 90iK and 90tK SNP panels were created by masking non-overlapping SNP from 777K SNP panel.
All panels, but one, were commercial panels: Illumina Bovine3K (3K), Illumina BovineLD (6K), Illumina BovineSNP50 (50K) and Illumina BovineHD (777K) panels (Illumina Inc., San Diego, USA), Beef LD GGP (8K), Indicus LD GGP (20K), GGP Taurus HD (90tK) and GGP Indicus HD (90iK) panels (Gene Seek Inc., Lincoln, USA) (Table 2).
All the SNPs from 8K SNP panel were part of the customized 15K SNP panel. The remaining SNPs (7K) were selected from the 50K SNP panel using high minor allele frequency, low linkage disequilibrium, and location (approximately evenly spaced between two SNPs in the 8K SNP panel) as selection criteria. The best possible threshold values to meet the three criteria were a minor allele frequency greater than 0.23 and a linkage disequilibrium, as measured by r2, less than 0.088.
For imputation to the 50K SNP panel, four different scenarios were explored as follows: including Nellore genotypes in the reference population and either including pedigree information (NE-P) or not including pedigree information (NE-NP); not including Nellore genotypes in the reference population and either including pedigree information (NNE-P) or not including pedigree information (NNE-NP).
For imputation to the 777K SNP panel, a third set of Hereford and Braford bulls were imputed in four different scenarios: including Nellore genotypes and pedigree information in the reference population (NE-P) or including Nellore genotypes and not including pedigree information in the reference population (NE-NP). Each of these two scenarios was carried out in one or two steps. Two-step imputation was carried out only for panels with density less than 50K SNP. Two-step imputation involved: 1) in the first step, the animals genotyped with 3K, 6K, 8K, 15K and 20K SNP panels were imputed to the 50K SNP panel using in the reference population all the animals genotyped with the 50K SNP panel; 2) in the second step, all the animals imputed to the 50K SNP panel were then imputed to the 777K SNP panel using as reference two-thirds of the Hereford and Braford and all Nellore bulls genotyped with the 777K SNP panel. One-step imputation was performed by imputing from the simulated low density panels directly to the 777K SNP panel.
Imputation accuracy of above scenarios was assessed by concordance rate (CR), which corresponds to the proportion of genotypes correctly imputed, and by allelic R2, which corresponds to the square of the correlation between the number of minor alleles in the imputed genotype and the number of minor alleles in the original genotype .
There were thirty imputation scenarios from low density panels to the 50K SNP panel. Twenty-four scenarios were examined for imputation from low and medium density panels to 777K SNP panel and thirty scenarios were used to assess differences in imputation accuracy in one or two steps (Table 3).
Imputation was carried out by FImpute v.2.2  and Beagle v.3.3 . Beagle was used in scenarios that did not include pedigree information and ungenotyped animals. FImpute was used in all scenarios.
Imputation methods can be based on linkage disequilibrium information between markers in the population, but also can use the inheritance information within family. Beagle software is based on linkage disequilibrium between markers in the population and uses a Hidden Markov model  for inferring haplotype phase and filling in genotypes. Beagle also exploits family information indirectly by searching for long haplotypes. Contrary to Beagle, FImpute software uses a deterministic algorithm and makes use of both family and population information directly. Family information is taken into account only when pedigree information is available. The population imputation in FImpute is based on an overlapping sliding window method  in which information from close relatives (long haplotype match) is first utilized and information from more distant relatives is subsequently used by shortening the window size. The algorithm assumes that all animals are related to each other to some degree ranging from very close to very distant relationships.
Comparison between scenarios
Analysis of variance was carried out using the GLM procedure in SAS version 9.2 (SAS Inst. Inc., Cary, NC) to compare the average CR and allelic R2 of each scenario. An arcsine square root  transformation was applied to CR and allelic R2 to normalize the residuals.
Of the 3,698 animals genotyped with the 50K SNP panel, ~24% had sire and/or dam genotyped and ~65% had at least one parent unknown in the pedigree. With respect to the animals genotyped with the 777K SNP panel, ~15% had sire and/or dam genotyped and ~35% had at least one parent unknown. Table 1 shows pedigree structure for each breed.
Table 4 provides the computing run time for each imputation scenario. Using FImpute, the run-time ranged between 2 and 48 minutes for different scenarios, while Beagle took between 25 and 2,280 minutes for the same scenarios. Table 5 provides the means and standard deviations of CR and allelic R2 for imputation to 50K and 777K SNP panels.
Imputation of the low density panels to the 50K SNP panel
There were significant differences (P < 0.05) in CR and allelic R2 between the two algorithms and between pairs of simulated low density panels, as well as a significant algorithm by panel interaction (P < 0.05). However, there were no significant differences (P > 0.05) in CR and allelic R2 between scenarios (Table 6).
The non-commercial 15K SNP panel resulted in the highest imputation accuracy of the low density panels with an overall CR of 0.973 and allelic R2 of 0.962, 0.109 and 0.175 points higher than the 3K SNP panel, respectively (Table 5). The use of Nellore genotypes or use of pedigrees in FImpute did not improve CR or allelic R2 when imputing to the 50K SNP panel (Table 6). The average CR and allelic R2 for the four scenarios were 0.940 and 0.905, respectively. Using FImpute resulted in an overall average CR of 0.943 and allelic R2 of 0.912 while for Beagle the same average features were 0.927 and 0.890, respectively (Table 5). The algorithm by panel interaction, showed larger differences in CR and allelic R2 between FImpute and Beagle for sparser panels (0.021 in CR and 0.031 in allelic R2 for the 3K SNP panel) when compared to denser panels (0.012 in CR and 0.016 in allelic R2 for the 15K SNP panel), with FImpute being consistently more accurate. Imputation accuracy for 8K and 20K SNP panels were not significantly different using Beagle (P > 0.05) with respect to CR and allelic R2 (Table 6). The highest CR (>0.977) and allelic R2 (>0.967) were obtained using the 15K SNP panel and FImpute.
An important measurement of imputation success is the number of animals imputed with modest accuracy (assumed <0.950 CR here). Using the 15K SNP panel resulted in 93% and 83% of the animals being imputed with a CR above 0.950 (average of all scenarios) for FImpute and Beagle, respectively, while using the 3K SNP panel as the low density panel resulted in only 6.3% and 0.8% of animals above this accuracy threshold using FImpute and Beagle, respectively. The results for the other panels ranged between 62% and 70% using FImpute and between 40% and 48% using Beagle (Figure 1).
The CR (average of all scenarios) for the 3K SNP panel, from either FImpute or Beagle, were lower than all other panels with CR values over all BTAs at or below 0.900. All other panels produced CR above 0.930 for all chromosomes. Imputation accuracy was found to be relative to chromosome length with the highest CRs obtained for BTA1 while the lowest CRs were obtained for BTA28 in all scenarios and both algorithms, however little difference was seen across the genome (Figure 2).
The average CR for imputation from the alternative low density panels (3K, 6K, 8K, 15K and 20K) to the 50K SNP panel was calculated for three different classes of minor allele frequency (MAF) (<0.01, 0.01-0.05, and >0.05). For the MAF class <0.01 the average CR was close to 1.00 for all panel densities. For SNPs with MAF 0.01-0.05 and >0.05 the average CRs ranged similarly from 0.84 to 0.97, depending on the panel density (Figure 3).
Imputation of the ungenotyped animals to the 50K SNP panel
FImpute allows for accurate imputation of 50K genotypes for ungenotyped animals that have four or more offspring . Thirty-seven animals that had four or more offspring were imputed and showed an average CR of 0.950 and with 99.86% of the SNPs imputed. When average CR were examined based on the number of offspring, accuracies of 0.924, 0.941, 0.972, 0.961 and 0.990 were found for bulls with 4–9, 10–19, 20–29, 30–39 and over 40 offspring, respectively. There were 11, 11, 9, 3 and 3 bulls in each of those progeny size classes, respectively. The lowest CR (0.900) corresponded to two Hereford animals with five offspring each, while the highest CR (above 0.980) was for six Braford animals with more than twenty offspring each.
Imputation of the low density panels to the 777K SNP panel
There were significant differences (P < 0.05) in CR and allelic R2 between algorithms, panels and scenarios when imputing to 777K SNP panel. The algorithm by panel interaction was also significant (P < 0.05) (Table 7).
Using FImpute resulted in an overall average CR of 0.921 and allelic R2 of 0.866, while Beagle yielded an average CR of 0.895 and allelic R2 of 0.826 (Table 5). The 6K, 8K and 20K SNP panels did not significantly differ (P > 0.05) in their average CR and allelic R2 (Table 7). The highest CR and allelic R2 were obtained with the 90tK SNP panel (CR = 0.955; allelic R2 = 0.925) and the lowest CR and allelic R2 with the 3K SNP panel (CR = 0.838; allelic R2 = 0.728). For the other panels, CR was between 0.898 and 0.952 and allelic R2 was between 0.829 and 0.919 (Table 5). The use of the pedigree information (NE-P) slightly decreased the CR and allelic R2 for imputation to the 777K SNP panel (P < 0.05) (Table 7). The interaction algorithm by panel, showed larger differences in CR and allelic R2 between FImpute and Beagle for sparse panels (0.028 in CR and 0.044 in allelic R2 for the 3K SNP panel) when compared to denser panels (0.016 in CR and 0.024 in allelic R2 for the 90tK SNP panel), with FImpute resulting in consistently higher accuracy of imputation.
The distributions of animals in high classes of CR varied between FImpute and Beagle. For FImpute, the proportion of animals imputed above a CR of 0.95 ranged from 12.8% for the 3K SNP panel to 73.6% for the 90iK SNP panel. For the other panels, the proportion of animals was between 20% and 48% (Figure 4a). For Beagle, with the exception of the 90iK SNP panel (39.5%) and the 90tK SNP panel (53.5%), the proportion of animals imputed above a CR of 0.95 was around 3% (Figure 4b).
Imputation accuracy per chromosome using Beagle was only greater than 0.900 when 50K or more dense panels were used (Figure 5b), while the same was observed using FImpute for all panels denser than 6K (Figure 5a). Per chromosome accuracies followed the results from 50K, where the highest accuracy was observed on BTA1, and the lowest on BTA28.
Imputation to the 777K SNP panel performed in two steps was statistically superior (P < 0.05) to imputation in a one-step both when measured by CR and allelic R2, and this difference was observed for all scenarios (Table 8). The interaction between number of steps and algorithm showed larger difference between CR and allelic R2 from one and two steps imputation when Beagle was used (0.107 in CR and 0.181 in allelic R2). The interaction between number of steps and low density panel showed that the difference between CR and allelic R2 from one to two steps imputation was larger for sparse panels (0.178 in CR and 0.298 in allelic R2 for the 3K SNP panel) when compared to denser panels (0.020 in CR and 0.034 in allelic R2 for the 20K SNP panel.
The relative increase in CR for the two-step imputation with respect to the one-step imputation was 27%, 12%, 11%, 5% and 2% for 3K, 6K, 8K, 15K and 20K SNP panels, respectively, and the relative increase in allelic R2 was 69%, 21% 22% 9% and 4% for 3K, 6K, 8K, 15K and 20K SNP panels, respectively.
The average CR for imputation from the alternative low density panels (3K, 6K, 8K, 15K, 20K, 50K, 90iK and 90tK) to the 777K SNP panel was calculated for three different classes of MAF (<0.01, 0.01-0.05, and >0.05). For the MAF class <0.01 the average CR was close to 0.99 for all panel densities, for MAF class 0.01-0.05 and >0.05 the average CRs ranged from 0.84 to 0.97 and from 0.65 to 0.96, respectively, depending on the panel density (Figure 6).
Imputation of the low density panels to the 50K SNP panel
There was no significant difference when imputation was performed using Nellore genotypes in the reference population and when the imputation was based on either family and population imputation or population imputation only. This means including pedigree information did not improve the CR and allelic R2 and is not required for accurate imputation. When Nellore genotypes were included in the reference population, it was expected that it would increase CR and allelic R2 because imputation population was mostly formed by Braford animals that have in their breed composition from 15% to 75% of zebu breeds, including the Nellore breed. This implies that the haplotypes present in the Braford animals available in the reference population are able to account for almost all of the haplotypes in the population. Ventura et al.  also did not find differences in imputation accuracies when the reference population included Angus plus multiple breeds or Charolais plus multiple breeds to impute crossbreds in Canada. Berry et al. , studying seven dairy and beef breeds in Ireland, concluded that reference populations formed by multiple breeds did not significantly increase the accuracy of the imputation of purebreds.
Including pedigree information did not increase CR or allelic R2. This could be expected due to the weak structure of the pedigree within the set of genotyped animals and in the whole pedigree file. Similar results were found by Carvalheiro et al.  when working with Nellore in Brazil with similar pedigree structure. However, Ma et al.  found increases in CR between 1% and 2% using Beagle and FImpute in Nordic Red cattle in Sweden when including genotypes of the bull-sires of the imputation population into the reference population. It would not, however, require pedigree information to detect these relationships in either algorithm.
The interaction between algorithm and panel was significant and yielded greater differences in CR and allelic R2 between FImpute and Beagle for low density panels, showing a greater advantage to using FImpute when a sparser low density panel is used. Carvalheiro et al. , working with Nellore in Brazil, also reported that FImpute outperformed Beagle for different low density panels and that there was a trend of greater differences between algorithms as low density panel density decreased.
The CR and allelic R2 values from FImpute in all analyses were consistently higher than those from Beagle, showing that the overlapping windows approach used by FImpute better infer missing genotypes than Hidden Markov models used by Beagle. Similar results were obtained by Carvalheiro et al.  in Nellore in Brazil and Larmer et al. , who worked on imputation from 6K and 50K SNP panels to 777K SNP panel in dairy cattle in Canada.
The 20K SNP panel was mainly developed for imputation to the 777K SNP panel and it has only 7,320 common SNPs with the 50K SNP panel. No difference between the 8K and 20K SNP panel was found using Beagle algorithm as they had similar number and average distance between the SNPs present on the 50K SNP panel. A few studies have tested the accuracy of imputation using different densities of markers and denser low density panels have consistently led to higher imputation accuracy in several beef cattle breeds, observed in Wang et al.  in Angus, Dassonneville et al.  in Blonde d’Aquitaine, Huang et al.  in Hereford and Chud  in Canchim cattle. The customized 15K SNP panel created in this study showed higher CR and allelic R2 when compared to the other low density panels, including the 20K SNP panel. The reason for that may because of a higher density of markers in low linkage disequilibrium with adjacent SNPs and medium to high minor allele frequency in the population, allowing a better haplotype reconstruction. The superiority of the customized 15K SNP panel in relation to the commercial panels, however, might be expected because it was created based on criteria specific for this population. Carvalheiro et al. , working with Nellore cattle in Brazil, also developed a 15K SNP panel for imputation to the 777K SNP panel. They found slightly better results when compared to imputation from the 50K SNP panel. One possible disadvantage of customized panels is the cost will likely be higher in comparison to already available commercial panels of similar density.
The highest accuracies were obtained for all low density panels when examining BTA1, whereas the worst results were obtained for BTA28. Sun et al. , working with Angus genotypes in the United States, reported that genotype imputation was more difficult in the initial and end regions of the chromosomes. Therefore, the shorter are the chromosomes, which is the case of BTA28 (46 Mb), the lower the overall chromosome accuracy, as the poorly imputed distal regions comprise a greater proportion of the overall chromosome. Similar results were found by Berry & Kearney  in Irish Holstein cattle, when imputing from the 3K to the 50K SNP panel. Moreover, Pausch et al. , working with Fleckvieh in Germany and imputing from 50K to 777K SNP panel, and Wang et al. , working with Angus in the United States and imputing to the 50K SNP panel from various low density panels, found higher and lower accuracies for BTA1 and BTA28, respectively, when compared to the average accuracy of imputation for all chromosomes.
Imputation of low density panels to the 777K SNP panel
On average, the imputation population had seven animals with one of the parents genotyped and the reference population had twenty-four animals with one of the parents also genotyped. The inclusion of pedigree information did not result in an increase in CR and allelic R2. Carvalheiro et al.  studying, among other factors, the effect of using or not the pedigree information in Nellore, also did not observe significant difference in CR when imputing from 15K and 50K to the 777K SNP panel using FImpute.
The two-step imputation procedure consistently out-performed imputation in one-step. This result confirmed that more SNPs contained on the low density panel, results in greater accuracy of imputation ,,,. Similar results were found by Larmer et al.  in Canadian Holstein cattle, when imputing in two steps from 6K to the 50K and from 50K to the 777K SNP panel. The interaction between algorithm and one or two steps was significant and showed greater difference in CR and allelic R2 between one and two steps methods when using Beagle. The percentage of animals with CR above 0.95, in general, was higher for higher density panels, as expected. However, the 15K SNP panel showed higher percentage than the 20K SNP panel, most likely due to the criteria that were used for developing the 15K SNP panel. Moreover, it may be also due to the fact that the 20K SNP panel was developed mainly for genotype imputation in Bos Taurus Indicus cattle.
The results by chromosome followed the same pattern found for imputation to the 50K SNP panel, with longer chromosomes having greater imputation accuracies ,.
Imputation of the ungenotyped animals to the 50K SNP panel
Genotype imputation for ungenotyped animals is now a lower cost alternative that can be used to increase the training population towards the implementation of genomic selection. Important ungenotyped ancestors that may have no available biological material to perform genotyping can also be accurately imputed using genotyped progeny information. Also, groups of cows that were ungenotyped due to the costs can have their genotypes inferred -. Different software, such as AlphaImpute , FindHap , PedImpute  and FImpute  are able to infer genotypes ungenotyped animals with high CR using different approaches, such as imputation based on: genotyped parents; sire and maternal grandsire, dam and paternal grand dam, sire only, dam only, and offspring. However, the accuracy of each approach is different -.
Ungenotyped animals in this study were imputed using FImpute, using offspring. FImpute requires at least 4 offspring be available for imputation of ungenotyped individuals (default parameter). Preliminary results obtained by Sargolzaei et al.  and Berry et al.  using FImpute clearly showed an inability to impute the genotype of sires when a paternal halfsib family size of three or less was used. However, the results indicated that the greater the number of genotyped offspring, the higher were the CR values.
These results were similar to the ones reported by Berry et al.  studying seven dairy and beef breeds in Ireland with five offspring per ungenotyped individual and Bouwman et al.  studying dairy cattle in Netherlands with four offspring per ungenotyped animal. The average value found in this study was compatible to what is considered an accurate imputation from low density, i.e. average CR above 0.950 and having a very low missing rate.
All low density panels, except the 3K SNP panel, can be used to impute to the 50K SNP panel with average concordance rates higher than 0.940. The customized 15K SNP panel yielded the highest percentage of animals with concordance rate above 0.950 of all the low density panels studied.
The 50K, 90iK and 90tK SNP panels can be used to impute to the 777K SNP panel with average concordance rates higher than 0.940. A two-step imputation is recommended for lower density panels, making use of all available intermediate density panel genotypes.
FImpute outperformed Beagle in all scenarios for imputation to both the 50K and to the 777K SNP panels both in terms of accuracy and computing time required.
Ungenotyped animals that have four or more offspring and do not have available biological material to carry out genotyping may have their 50K SNP panel genotype inferred with an average concordance rate of 0.950 in the Hereford/Braford population analyzed.
Bos taurus autosomal chromosome
General linear models
GeneSeek Genomic Profiler
Minor allele frequency
Mega base pairs
Statistical analysis system
Single nucleotide polymorphism
United States of America
Elsik CG, Tellam RL, Worley KC, The Bovine Genome Sequencing and Analysis Consortium: The genome sequence of taurine cattle: a window to ruminant biology and evolution. Science. 2009, 324: 522-528. 10.1126/science.1169588.
Zhang Z, Druet T: Marker imputation with low-density marker panels in Dutch Holstein cattle. J Dairy Sci. 2010, 93: 5487-5494. 10.3168/jds.2010-3501.
Druet T, Schrooten C, de Roos APW: Imputation of genotypes from different single nucleotide polymorphism panels in dairy cattle. J Dairy Sci. 2010, 93: 5443-5454. 10.3168/jds.2010-3255.
Hozé C, Fouilloux M-N, Venot E, Guillaume F, Dassonneville R, Fritz S, Ducrocq V, Phocas F, Boichard D, Croiseau P: High-density marker imputation accuracy in sixteen French cattle breeds. Genet Sel Evol. 2013, 45: 33-10.1186/1297-9686-45-33.
Ventura RV, Lu D, Schenkel FS, Wang Z, Li C, Miller SP: Impact of reference population on accuracy of imputation from 6K to 50K SNP chips in purebred and crossbreed beef cattle. J Anim Sci. 2014, 92: 1433-1444. 10.2527/jas.2013-6638.
Corbin LJ, Kranis A, Blott SC, Swinburne JE, Vaudin M, Bishop SC, Woolliams J: The utility of low-density genotyping for imputation in the Thoroughbred horse. Genet Sel Evol. 2014, 46: 9-10.1186/1297-9686-46-9.
Huang Y, Hickey JM, Cleveland MA, Maltecca C: Assessment of alternative genotyping strategies to maximize imputation accuracy at minimal cost. Genet Sel Evol. 2012, 44: 25-10.1186/1297-9686-44-25.
Browning SR, Browning BL: Rapid and accurate haplotype phasing and missing-data inference for whole-genome association studies by use of localized haplotype clustering. Am J Hum Genet. 2007, 81: 1084-1097. 10.1086/521987.
Druet T, Georges M: A hidden markov model combining linkage and linkage disequilibrium information for haplotype reconstruction and quantitative trait locus fine mapping. Genetics. 2010, 184: 789-798. 10.1534/genetics.109.108431.
Howie B, Marchini J, Stephens M: Genotype imputation with thousands of genomes. G3 (Bethesda). 2011, 1: 457-469. 10.1534/g3.111.001198.
Sargolzaei M, Chesnais JP, Schenkel FS: A new approach for efficient genotype imputation using information from relatives. BMC Genomics. 2014, 15: 478-10.1186/1471-2164-15-478.
VanRaden PM, O’Connell JR, Wiggans GR, Weigel KA: Genomic evaluations with many more genotypes. Genet Sel Evol. 2011, 43: 10-10.1186/1297-9686-43-10.
Hayes BJ, Bowman PJ, Chamberlain AJ, Goddard ME: Invited review: genomic selection in dairy cattle: progress and challenges. J Dairy Sci. 2009, 92: 433-443. 10.3168/jds.2008-1646.
Aguilar I, Misztal I, Johnson DL, Legarra A, Tsuruta S, Lawlor TJ: Hot topic: a unified approach to utilize phenotypic, full pedigree, and genomic information for genetic evaluation of Holstein final score. J Dairy Sci. 2010, 93: 743-752. 10.3168/jds.2009-2730.
Brito FV, Neto JB, Sargolzaei M, Cobuci JA, Schenkel FS: Accuracy of genomic selection in simulated populations mimicking the extent of linkage disequilibrium in beef cattle. BMC Genet. 2011, 12: 80-10.1186/1471-2156-12-80.
Sargolzaei M, Schenkel FS, Chesnais J: Impact of amount of dam genotypic information on family-based imputation accuracy. In Dairy Cattle Breed Genet Comm Meet 2010. Guelph/ON Canada; 2010
Dassonneville R, Fritz S, Ducrocq V, Boichard D: Short communication: Imputation performances of 3 low-density marker panels in beef and dairy cattle. J Dairy Sci. 2012, 95: 4136-4140. 10.3168/jds.2011-5133.
IBGE: Produção Da Pecuária Municipal 2012 (In Portuguese). Brasília, Brazil; 2012:71.
Índex ASBIA - importação, exportação e comercialização de sêmen 2011 (In portuguese) [http://www.asbia.org.br/novo/upload/mercado/relatorio2011.pdf]
Fries LA: Cruzamentos em Gado de Corte (In portuguese). In 4o Simpósio sobre Pecuária Corte, 8–10 Outubro 1996. Piracicaba/SP, Brasil; 1996
Carvalheiro R, Boison SA, Neves HHR, Sargolzaei M, Schenkel FS, Utsunomiya YT, O’Brien AMP, Sölkner J, McEwan JC, van Tassell CP, Sonstegard TS, Garcia JF: Accuracy of genotype imputation in Nelore cattle. Genet Sel Evol. 2014, 46: 69-10.1186/s12711-014-0069-1.
Dassonneville R, Brøndum RF, Druet T, Fritz S, Guillaume F, Guldbrandtsen B, Lund MS, Ducrocq V, Su G: Effect of imputing markers from a low-density chip on the reliability of genomic breeding values in Holstein populations. J Dairy Sci. 2011, 94: 3679-3686. 10.3168/jds.2011-4299.
Nicolazzi EL, Biffani S, Jansen G: Short communication: imputing genotypes using PedImpute fast algorithm combining pedigree and population information. J Dairy Sci. 2013, 96: 2649-2653. 10.3168/jds.2012-6062.
Pausch H, Aigner B, Emmerling R, Edel C, Götz K-U, Fries R: Imputation of high-density genotypes in the Fleckvieh cattle population. Genet Sel Evol. 2013, 45: 3-10.1186/1297-9686-45-3.
Browning BL, Browning SR: A unified approach to genotype imputation and haplotype-phase inference for large data sets of trios and unrelated individuals. Am J Hum Genet. 2009, 84: 210-223. 10.1016/j.ajhg.2009.01.005.
Rabiner LR, Juang BH: An introduction to hidden Markov models. IEEE/ASSP 1986.,
Cochran WG, Snedecor GW: Statistical Methods. 1989, Iowa State University Press, Ames, 8
Berry DP, McClure MC, Mullen MP: Within- and across-breed imputation of high-density genotypes in dairy and beef cattle from medium- and low-density genotypes. J Anim Breed Genet. 2013, 131: 165-172. 10.1111/jbg.12067.
Ma P, Brøndum RF, Zhang Q, Lund MS, Su G: Comparison of different methods for imputing genome-wide marker genotypes in Swedish and Finnish Red Cattle. J Dairy Sci. 2013, 96: 4666-4677. 10.3168/jds.2012-6316.
Larmer SG, Sargolzaei M, Schenkel FS: Extent of linkage disequilibrium, consistency of gametic phase, and imputation accuracy within and across Canadian dairy breeds. J Dairy Sci. 2014, 97: 1-14. 10.3168/jds.2013-6826.
Wang H, Woodward B, Bauck S, Rekaya R: Imputation of missing SNP genotypes using low density panels. Livest Sci. 2012, 146: 80-83. 10.1016/j.livsci.2011.12.010.
Huang Y, Maltecca C: Effects of reduced panel, reference origin, and genetic relationship on imputation of genotypes in Hereford cattle. J Anim Sci. 2012, 90: 4203-4208. 10.2527/jas.2011-4728.
Chud TCS: Metodologias E Estratégias de Imputação de Marcadores Genéticos Em Bovinos Da Raça Canchim (in Portuguese). Joboticabal/SP - Brazil; 2014
Sun C, Wu X-L, Weigel KA, Rosa GJM, Bauck S, Woodward BW, Schnabel RD, Taylor JF, Gianola D: An ensemble-based approach to imputation of moderate-density genotypes for genomic selection with application to Angus cattle. Genet Res (Camb). 2012, 94: 133-150. 10.1017/S001667231200033X.
Berry DP, Kearney JF: Imputation of genotypes from low- to high-density genotyping platforms and implications for genomic selection. Animal. 2011, 5: 1162-1169. 10.1017/S1751731111000309.
Bouwman AC, Hickey JM, Calus MPL, Veerkamp RF: Imputation of non-genotyped individuals based on genotyped relatives: assessing the imputation accuracy of a real case scenario in dairy cattle. Genet Sel Evol. 2014, 46: 6-10.1186/1297-9686-46-6.
Pimentel ECG, Wensch-Dorendorf M, König S, Swalve HH: Enlarging a training set for genomic selection by imputation of un-genotyped animals in populations of varying genetic architecture. Genet Sel Evol. 2013, 45: 12-10.1186/1297-9686-45-12.
Berry DP, McParland S, Kearney JF, Sargolzaei M, Mullen MP: Imputation of ungenotyped parental genotypes in dairy and beef cattle from progeny genotypes. Animal. 2014, 8: 895-903. 10.1017/S1751731114000883.
Hickey JM, Kinghorn BP, Tier B, van der Werf JHJ, Cleveland MA: A phasing and imputation method for pedigreed populations that results in a single-stage genomic evaluation. Genet Sel Evol. 2012, 44: 9-10.1186/1297-9686-44-9.
The authors thank the following organizations for providing data and collaborating within the project: Conexão Delta G’s Genetic Improvement Program - Hereford and Braford; Paint Genetic Improvement Program – Nellore and Embrapa; and Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) that provides graduate fellowship for the first author. Research partially supported by CNPq - National Council for Scientific and Technological Development grant 478992/2012-2 and Embrapa - Brazilian Agricultural Research Corporation grants 02.09.07.004 and 01.11.07.002.07.
The authors declare that they have no competing interests.
MLP participated in the design of the study, carried out the analyses, was involved in the discussions, prepared and drafted the manuscript. JB participated in the design of the study, was involved in the discussions and helped to draft the manuscript. FFC was involved in the field experimental design and data collection, in the discussions and helped to draft the manuscript. MS developed the FImpute software, was involved in the discussions, and helped to draft the manuscript. SGL helped to draft the manuscript. FSS participated in the design of the study, was involved in the discussions and helped to draft the manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Piccoli, M.L., Braccini, J., Cardoso, F.F. et al. Accuracy of genome-wide imputation in Braford and Hereford beef cattle. BMC Genet 15, 157 (2014). https://doi.org/10.1186/s12863-014-0157-9
- Imputation accuracy
- Low density panel
- High density panel